Vector data conversion
by
andilo
—
last modified
Sep 20, 2007 03:35 PM
Hello,
for the processing of Vector data we usually convert the recorded data to ascii format using the Vector software.
I have noticed, however, that the precision of the original data is one decimal digit better if I convert the data from the binary files using my own script.
Is there a way to get the full data precision using Nortek software?
thank you and best regards,
Andreas
for the processing of Vector data we usually convert the recorded data to ascii format using the Vector software.
I have noticed, however, that the precision of the original data is one decimal digit better if I convert the data from the binary files using my own script.
Is there a way to get the full data precision using Nortek software?
thank you and best regards,
Andreas
Current state:
Being created
Hi, the resolution of the velocity data changes as you change the velocity setting in the Vector (varies between mm/s and 1/10 of mm/s). Could it be that you have looked at two different files when you say that the resolution is different 
Best regards, Atle Lohrmann
Best regards, Atle Lohrmann
Current state:
Being created
Hi Atle,
No, I was not looking at two different files.
But, indeed I was using the 1/10 mm/s scaling. This is stated in the header file (*.hdr) for the data conversion as well. The velocity data in the corresponding *.dat file, however, are given in m/s with a precision of 3 digits (scaling and units of the velocity data are correct, but the 1/10 mm/s desimal digit is not available in the *.dat file).
cheers,
Andreas
No, I was not looking at two different files.
But, indeed I was using the 1/10 mm/s scaling. This is stated in the header file (*.hdr) for the data conversion as well. The velocity data in the corresponding *.dat file, however, are given in m/s with a precision of 3 digits (scaling and units of the velocity data are correct, but the 1/10 mm/s desimal digit is not available in the *.dat file).
cheers,
Andreas
Current state:
Being created
Hello Andreas,
I suspect you might be using an old version of the Vector software. The velocity data precision was increased to 4 digits in Version 1.28. Please download from our support pages.
Best regards,
Oistein
I suspect you might be using an old version of the Vector software. The velocity data precision was increased to 4 digits in Version 1.28. Please download from our support pages.
Best regards,
Oistein
Current state:
Being created
Powered by
Ploneboard
Forgot your password?
New user?
