http://www.nortek-as.com/forum/system-integration-and-telemetry Find solutions for system integration tasks daily 1 2007-11-12T12:20:37Z http://www.nortek-as.com/forum/system-integration-and-telemetry/995869370/228695666/view Here is a link to the timing diagram: Paradopp sensor timing - Sven 2008-05-13T10:52:02Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/286845805/419935492/view Hi Jennifer, I tried this through the terminal emulator. First I sent 53 43 55 55 30 17 08 04 to set the clock (SC in hex plus clock data April 30, 2008 ... 2008-05-05T08:52:18Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/286845805/419272827/view I have a question about using the SC command with a Vector.  I can set the clock through the Vector Software (no problem), but when I try to send the RC ... 2008-05-01T03:58:52Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/527246498/103609148/view Dear Mahyar From what you are writing it is very difficult for me to understand the exact details of the system. Is this system something that we have ... 2008-02-13T08:33:20Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/527246498/103609146/view Hi, i work on a project with 6 slave and 1 master PLC's using radio modem to connect all together, radio has RS232/485 and PLC is siemens with RS232c ... 2008-02-07T07:10:05Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869383/608060916/view Cal Poly (San Luis Obispo, California) reports real-time AWAC data using the Nortek SeaState software on their website:  ... 2008-01-27T03:13:45Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/527246497/738662741/view The engineers at Link-Quest have found that the best setting for using the AquaPro software to communicate with an Aquadopp Profiler via the Link-Quest ... 2008-01-24T15:13:29Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869391/41264703/view The command for setting the analog output voltages on the Vectrino does not work on the latest hardware revision of the Vectrino. This problem has been fixed ... 2008-01-04T10:35:51Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/27509323/324788425/view Quote Using the Aquadopp via comms port. question 1 According to the PdInterface document the reply to a "RF" command returns the FAT record. This ... 2007-11-15T09:41:51Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869373/26272703/view In order to get data to both log locally on your Nortek instrument AND steam the measurements out the serial line you will have to choose "Start with Recorder" ... 2007-07-30T11:18:13Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869367/595391999/view If you are using an Acoustic Modem (Benthos or Nortek w/Benthos technology) you will have to set the Modem with verbose OFF. What happens if it is on is that ... 2007-07-11T13:48:59Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869372/444117608/view The process of system integration of Nortek products is covered in a separate manual which is called the System Integrator Guide. The manual covers basic ... 2007-06-22T09:59:41Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869383/352090838/view Hi, here is a site with some really fancy graphics -- but not quite acessible to those of us who cannot read Chinese properly. ... 2007-06-07T08:50:21Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869383/352090841/view A Nortek 400 kHz Aquadopp Profiler is mounted on a GOMOOS buoy near New Meadows River, Maine, run by the University of Maine:   ... 2007-06-06T15:55:17Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869383/352090839/view A Nortek "platform mount" AWAC is mounted on the leg of the Ambrose Light C-MAN station (offshore NY Harbor) run by NDBC. ... 2007-06-06T15:51:16Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869391/80776708/view Quote We want to use the analog outputs to monitor 3 Vectrino units using our data logging software. We need to calibrate our acquisition system. Thus we ... 2007-05-10T15:41:55Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869361/915971205/view Hi Eric, When you check for ASCII format in the Disk Filename menu selection in the AquaPro software, the corresponding data file contains velocities in m/s. ... 2007-04-26T12:12:34Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869361/915971206/view Hi.  Can you please tell me what the units are for velocity in this sample ASCII output from an Aquadopp Profiler: 04 21 2005 13 49 03    0 ... 2007-04-25T22:29:41Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869389/881234629/view Hi Urchinman, Something to keep in mind is that the Aquadopp software does not account for external sensors when calculating battery usage and deployment ... 2007-03-02T21:00:39Z Comment http://www.nortek-as.com/forum/system-integration-and-telemetry/995869383/352090840/view Hi there The number of online wave and current profiling systems is growing quite rapidly. As an encouragement to us all - and showing that it isn't all ... 2007-02-03T16:23:34Z Comment