http://www.nortek-as.com/forum/software Report on trouble with the software installation, instrument configuration, etc. daily 1 2007-11-12T12:20:37Z http://www.nortek-as.com/forum/software/166174834/969712050/view The concept of "precision" is related to idea of "repeatability" as it is being used for acoustic current profilers and current meters.  Because of issues ... 2008-12-04T08:40:14Z Comment http://www.nortek-as.com/forum/software/977208044/707210503/view This is a recommended way to export time series data from STORM or SURGE into tab delimited ASCII files: 1) Right-click on the time series and select ... 2008-12-03T17:44:40Z Comment http://www.nortek-as.com/forum/software/166174834/686870080/view Hello   Just to add to the previous inquiry as this "+/- 10%" criteria could have serious implications to our business activities as well. ... 2008-12-03T16:20:08Z Comment http://www.nortek-as.com/forum/software/166174834/686870079/view Hi I do hydrographic surveys for finfish farms in Scotland and there are criteria for this surveys set out by a Scottish goverment department. In Shetland ... 2008-12-03T10:51:01Z Comment http://www.nortek-as.com/forum/software/644656770/123222265/view    Hello Mike,   The source code was posted in another thread titled "Nortek to Matlab". If the following link works you will find ... 2008-12-02T09:52:19Z Comment http://www.nortek-as.com/forum/software/644656770/139559204/view I appreciate the the bin2mat software has been made available for Windows platforms; unfortunately, our data processing infrastructure is on Linux. Can a ... 2008-12-01T20:10:06Z Comment http://www.nortek-as.com/forum/software/617214248/484030264/view Naturally, I figured it out right after I posted.  Use the Aquadopp program to convert, not ExploreAQD. 2008-10-31T18:55:33Z Comment http://www.nortek-as.com/forum/software/617214248/484030263/view I'd like to get an ASCII dump of the pressure data from an Aquadopp.  Using ExploreAQD, I can dump the velocity data (no sensors), or the diagnostic data ... 2008-10-31T18:35:58Z Comment http://www.nortek-as.com/forum/software/245015163/627055146/view This is a good idea. I will check with Torstein when he is back from travelling next week and we will contact you directly. Best regards, Oistein 2008-10-31T08:26:21Z Comment http://www.nortek-as.com/forum/software/245015164/454181980/view Dear Alan The Nortek instruments that were developed from 1999 and onwards do not estimate the "standard deviation" as part the  data collection ... 2008-10-30T18:19:59Z Comment http://www.nortek-as.com/forum/software/245015164/409954240/view Hi, For old .ADP files viewed in ExploreP you could do a contour plot of standard deviation and use the range settings to quickly see where data exceeded a ... 2008-10-30T12:18:34Z Comment http://www.nortek-as.com/forum/software/245015163/702134854/view Thanks Oistein lets keep in contact about this; I've another question about seastate. Talking with Manlio (the national contact for Nortek) about the ... 2008-10-30T10:05:59Z Comment http://www.nortek-as.com/forum/software/245015163/926017445/view Hello, I am glad to hear that your setup is working. SeaState normally handles "socket error" situations caused by network failure and automatically ... 2008-10-29T11:11:51Z Comment http://www.nortek-as.com/forum/software/245015163/964570223/view Here in Venice we are quite happy with our actual setup of AWAC deployed nearby our Oceanographic Tower Seastate provide, trough a wireless bridge, real ... 2008-10-27T16:12:29Z Comment http://www.nortek-as.com/forum/software/617214247/963573064/view Hi Laura,   Mounting Height is the distance is over the bottom.  As you noted, the height in the frame.  This is imporant for the correct ... 2008-10-13T09:31:04Z Comment http://www.nortek-as.com/forum/software/617214247/443823238/view Can you clarify what the mounting height is, as asked for in Storm, View drop down menu, view settings, then profile.  It askes for mounting depth, is ... 2008-10-08T11:52:06Z Comment http://www.nortek-as.com/forum/software/644656763/743615999/view Eric, Don't think that the Continental data format was included at the time Bin2Mat was made.  -Torstein 2008-10-06T08:02:51Z Comment http://www.nortek-as.com/forum/software/644656763/682329791/view Do you have a "bin2mat" program to process Continental Profiler data in Matlab? Thanks, Eric 2008-10-02T18:06:00Z Comment http://www.nortek-as.com/forum/software/697145351/443403771/view Dear Charlie Yes, you got it right.  As for making a script that can do variable pitch and roll, you simply have to write the appropriate loops over ... 2008-09-26T21:26:56Z Comment http://www.nortek-as.com/forum/software/697145351/524963445/view So just to clarify, If I insert a line saying heading=90, before the hh = pi*(heading-90)/180; That will correspond to due East? :)   ALSO: The ... 2008-09-25T22:17:22Z Comment