ADP - Norterm.exe

Hello,
I do not find the list of the orders to dialogue with the ADP via the software norterm, even in the operation manual. Can you send this list (ex to me: [PRI 10][CR], etc...).

Best regards,
Eric

Hi there

The commands are given in the firmware manual.  Please send us an email and we will send you a copy.

Here are some of the more common commands:

General

Start -  Starts real time data collection
Deploy - Starts autonomous deployment
SaveSetup -  Save current parameters to EEPROM
Date - Sets system clock date yy/mm/dd
Time -  Sets system clock time hh:mm:ss
PowerOff -  Put NDP in sleep mode to conserve power

OutFormat OF Specifies output data format ASCII or
BINARY
Recorder (none) Turns internal recording on or off ON or OFF
Recorder ? (none) Returns whether the recorder is present

Setup
Temp d.d Default water temperature (°C)
Sal d.d Sets default salinity (ppt)
Ncells d NC Number of depth cells to record
CellSize d.d CS Vertical size of depth cells (m)
BlankDistance d.d BD Blanking distance (m)
AvgInterval d AI Averaging interval (s)
ProfileInterval d PRI Time between profiles (s) d
CoordSystem CY Coordinate system used for recorded velocities BEAM or XYZ or ENU

Deployment
Deployment (none) Sets deployment name ASCII text
Comments (none) Sets deployment comments ASCII text
StartDate SD Sets deployment start date yy/mm/dd
StartTime ST Sets deployment start time hh:mm:ss
AvgInterval AI Averaging interval (s) d
ProfileInterval PRI Time between profiles (s) d

Recorder Commands
LD (none) List deployments
OD (none) Open deployment to access data
Format (none) Format recorder card (clear all data)
RecStatus (none) Show the size and type of recorder.

Sensor Commands
Sensor (none) Display most recent temperature, pressure and
battery voltage data
Sensor CONT (none) Display continuous temperature, pressure and
battery voltage data
Compass (none) Display most recent heading, pitch and roll data
Compass CONT (none) Display continuous heading, pitch and roll data
Compass ? (none) Checks if compass is present