http://www.nortek-as.com/forum/deployment Mechanical and operational issues daily 1 2007-11-12T12:20:37Z http://www.nortek-as.com/forum/deployment/325661387/310306406/view We have a run a test with three different zinc oxides, a zinkpaste with 40% zinc oxide, Silulen (Nycomed) with 20% zinc oxide and Desitin (Pfifer) 40% zinc ... 2008-02-14T12:51:08Z Comment http://www.nortek-as.com/forum/deployment/560668502/767414664/view (Posted by jeffreym on Nov. 23 2007 ) OK, I will try your suggestion.  Thank you for your help. Jeff Muehlbauer 2007-12-19T08:34:45Z Comment http://www.nortek-as.com/forum/deployment/560668502/767414663/view (Posted by Jonas Røstad on Nov. 22 2007) Hi Jeff, I think your problem is quite common, the 9 pin DSUB is dying these days. There is a variaty of serial ... 2007-12-19T08:33:58Z Comment http://www.nortek-as.com/forum/deployment/560668502/767414662/view (Posted by jeffreym on Nov. 20 2007 ) Hi, I have an aquadopp 2 MHz current profiler (side-looking head) that came with a cable to connect to a computer ... 2007-12-19T08:32:41Z Comment http://www.nortek-as.com/forum/deployment/173535058/560082102/view (Posted by  dschilli on Nov. 13 2007) That's perfect! 2007-12-19T08:29:33Z Comment http://www.nortek-as.com/forum/deployment/173535058/499546941/view (Posted by Atle Lohrman on Nov. 06 2007) Dear Doug Here is a drawing of the probe.  I hope it makes the orientation of cable probes with ... 2007-12-19T08:28:08Z Comment http://www.nortek-as.com/forum/deployment/173535058/499546940/view (Posted by  dschilli on Nov. 06 2007) I have a vector with it's probe on a cable, and the tilt sensor mounted for operation with the pressure ... 2007-12-19T08:17:04Z Comment http://www.nortek-as.com/forum/deployment/325661370/967137331/view Atle, thank you very much. I checked under "seeding material" and indeed it was a lot of help. Vassilis 2007-09-29T06:35:40Z Comment http://www.nortek-as.com/forum/deployment/325661370/967137329/view Hi, the Nortek seeding material is always and option.  If you do a search here on the forum you should be able to find references to the US manufacturer of the ... 2007-09-26T07:26:27Z Comment http://www.nortek-as.com/forum/deployment/325661370/967137330/view Hello, we would like to make a laboratory experiment, deploying an Aquadopp HR and a Vector in a tank filled with tap water (from the public network). We ... 2007-09-25T06:56:13Z Comment http://www.nortek-as.com/forum/deployment/325661371/191154960/view Hi again, We have tested two different batteries to depletion and we have asked the battery manufacturer if it could be a problem with shelf life.   At this ... 2007-08-22T10:31:15Z Comment http://www.nortek-as.com/forum/deployment/325661371/191154957/view Hi The initial characteristics of the battery packs have not changed; we are measuring about 11.5V when they are loaded. We are now running several packs ... 2007-08-17T07:19:08Z Comment http://www.nortek-as.com/forum/deployment/325661371/191154959/view Dear Atle, Thank you for your response.  I neglected to mention this Vector was set up to sample continuously. Considering your thoughts, I checked the ... 2007-08-15T21:54:54Z Comment http://www.nortek-as.com/forum/deployment/325661371/191154956/view Dear Chris This is the second time this month I have heard about Lithium battery packs that have excessive voltage drops. In our testing of the Tadiran packs, ... 2007-08-15T08:57:33Z Comment http://www.nortek-as.com/forum/deployment/325661371/191154958/view Our Vector recently came up from a deployment at 90m (9.5oC).  It was used to power (at battery voltage) and sample (fast - 8Hz) oxygen and nitrate ... 2007-08-09T22:19:00Z Comment http://www.nortek-as.com/forum/deployment/325661374/791624353/view Dear Mr. Jonas, Thanks for your suggestions and drawing. Now I have a need of adapters which can easily fit with Aquafin and Valeport CT sensor (Model 620 ... 2007-08-03T04:52:43Z Comment http://www.nortek-as.com/forum/deployment/325661374/791624351/view Dear Mr. Kumar, We can upon request make adapters that can fit to external sensors. Please have a look at the attached drawing for an example for one we made ... 2007-07-31T10:21:58Z Comment http://www.nortek-as.com/forum/deployment/325661374/791624352/view Hi to all, I want to know that How to integrate and deploy CT sensor with Aquadopp along with Aquafin. I want to deploy all together ( If there is any ... 2007-07-25T08:42:39Z Comment http://www.nortek-as.com/forum/deployment/325661380/947535479/view Dear Emily You can use your own power source for the Vectrino.  A car battery, for example, should work fine. Best regards, Atle Lohrmann 2007-07-02T11:14:57Z Comment http://www.nortek-as.com/forum/deployment/325661380/947535478/view We would like to use the Vectrino in the field to take measurements off a dock, but we do not have a power source nearby.  We wanted to check and see if ... 2007-06-29T20:32:29Z Comment