Deploy problem

Hello,

We have gladly used your ADP since 2000. But, the following problem occurs.
According to the content listed in log file below, ADP does not continue to work the next step after initializing recorder-“READY”. We would like to solve this problem as soon as possible because of the coming important current observation project in October. One thing we can guess is of internal battery problem, which we have not changed it over 5 years.

Could you please give me a solution with respect to this problem.
I look forward to reading your kind reply ASAP.

Best regards,
Tae-Wan Kim

------------------------------------------------------------------------------------------

---------------
DEPLOYMENT : DEF
COMMENT 1  :
COMMENT 2  :
COMMENT 3  :
PC Time                : 2005/10/04 19:30:07
System Time            : 2005/10/04 19:30:07
Deployment Time        : 2005/10/04 19:40:00
USER PARAMETERS          from Deploy File     read from ADP Sensor
Averaging Interval (s) :       180       180
Profile Interval   (s) :       300       300
Ping Interval      (s) :       0.0       0.0
Burst Mode             :        NO        NO
Burst Interval     (s) :       300       300
Profiles Per Burst     :         1         1
Water Temp.     (Deg C):      20.0      20.0
Water Salinity   (ppt) :       0.0       0.0
Temperature Mode       :  MEASURED  MEASURED
Number of Depth Cells  :        25        25
Depth Cell Size    (m) :      1.00      1.00
Blanking Distance  (m) :      0.40      0.40
Coordinate System      :       ENU       ENU
ADP STATUS:
Battery Voltage        :     17.20
Total Recorder Size(kb):     10240
Recorder Size Left (kb):      7360
DEPLOYMENT STATUS:
Response from ADP after DEPLOY command:
Checking Deployment Parameters:
------------------------------------------------------------------------------------------

-------------------------

Dear Tae-Wan Kim

The configuration of your system seems fine.  What happens when you try to deploy the instrument?

Best regards, Atle Lohrmann

Dear Atle Lohrmann

thank you for your answer. I try deploy to the ADP. The deploy process is progress satisfactorily until the setting of the start time. And, An message is print that starting deployment please wait! Next, an error message is print that start deploymenet failed due to initializing recorder.
why is it that ADP is not deploy?

Best regards,
Tae-Wan Kim