http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted Analyzing and interpreting data collected with Nortek VM-profilers daily 1 2007-11-12T12:20:37Z http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/969519539/951116700/view Hi Becky, The SurveyVM software is designed to provide realtime monitoring of current speed and direction at different depths below a moving vessel. What ... 2011-08-25T10:50:30Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/969519539/767132509/view whoops, its obvious when you point it out!   sorry, i have another issue. Hopefully this one is as easy to solve: I want to include an auxillary sensor ... 2011-08-24T09:41:27Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/969519539/767132508/view whoops, its obvious when you point it out!   sorry, i have another issue. Hopefully this one is as easy to solve: I want to include an auxillary sensor ... 2011-08-24T09:41:24Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/969519539/134419735/view Dear Becky,   You have actually told the software that you are only interested in the first 10m of the water column. The attached picture is highlighting ... 2011-08-23T10:43:36Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/969519539/216488948/view Takk Jonas  I have uploaded the exported .DAT file to the FTP and it is called "for_jonas" I have also uploaded a print screen of the export dialogue box ... 2011-08-19T13:37:02Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/969519539/72230734/view Hi Becky,   If you haven't chosen any distance averaging every cell should by exported. I just checked my copy of SurveyVM with a test file and it looked ... 2011-08-18T12:54:22Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/969519539/106892076/view Thanks Jonas for your response. I have 3 sets of load data (i.e VE-001 VN-001 VU-001 Vel001 Dir001 , VE-002 VN-002 VU-002 Vel002 Dir002, VE-003 VN-003 ... 2011-08-17T11:02:32Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/969519539/702489635/view Dear Becky,   Please find the format of the exported ASCII file at  http://www.nortek-as.com/lib/manuals/surveyvm-exported-data-formats The ... 2011-08-16T13:01:31Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/969519539/667558793/view Hello, I have been given some raw .adp files for a vessel mounted AWAC which i would like to use in MATLAB. When using the data export on VMsurvey.exe, the ... 2011-08-15T14:41:20Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/233238155/209585479/view Hi Sean,   Vel001 is  meters per second while Dir001 is relative to north not the Vessel. Best regards Jonas Røstad   2011-06-27T13:15:58Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/233238155/209585478/view Hi,   I am being provided with a data file from a vessel using a Nortek ADCP. The file is an ASCII log recording a sample of data every few minutes, the ... 2011-06-26T19:07:00Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/993830627/734267337/view You'll need to subtract the vessel velocity from the measured velocities to obtain any meaningful current measurements. There are a variety of techniques for ... 2010-11-05T18:48:58Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/993830627/206317553/view Any body have any experience with the processing of data from an adcp that is following a sawtooth/undulating pattern to extract currents or scattering volume? 2010-11-04T05:02:10Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/90678679/620660250/view Hello Liam, According to UKOOA the E7010 record contains 'User Defined Observation Set Data" with the following format Observation set reference number [ ... 2008-10-27T14:05:39Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/90678679/275981162/view Hi, We are using a vessel mounted sensor to produce current data for us. A client asked for this to be included in one of our output files. An example of ... 2008-10-24T13:54:57Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/91571191/491242579/view Hi Mal, Ship profiles If you are planning on using a boat/ship to take profiles, then you may want to put it in XYZ instead of ENU so that the influences ... 2007-09-24T11:47:58Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/91571191/491242572/view So if i cannot use my Aquadopp profiler boat mounted while motoring, i plan to take profiles at multiple sites while stationary using the Aquadopp either: - ... 2007-09-21T08:05:58Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/91571191/491242578/view Dear Roger I can understand how this can be confusing - our work with vessel mounted systems is not well documented. The Survey software comes in two ... 2007-02-14T13:33:12Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/91571191/491242577/view Hi, I am a little confused by these posts.  Is it possible to use an aquadopp as a vessel mounted profiler when using RTK GPS? Or do you need the AWAC to do ... 2007-02-14T12:49:51Z Comment http://www.nortek-as.com/en/knowledge-center/forum/vessel-mounted/91571182/687454762/view Dear André Sorry for the late answer -- vacation time has taken its toll on the forum response rate this summer. The issue of vertical velocities under a ... 2006-08-30T09:59:11Z Comment