http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers Questions about high resolution current profilers daily 1 2007-11-12T12:20:37Z http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/502529703/70316985/view I'll see what I can do, but no promises. The differences in the file format between a regular and an HR file really require adding the ability to read the HRs ... 2011-11-15T13:52:22Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/502529703/380473691/view As a simple (and dirty) "fix", perhaps have simply a flag telling Storm to ignore in this case anything different from a "regular" prf file?  I.e. just have ... 2011-11-15T03:48:08Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/502529703/988145268/view The file structure is similar for each of the Nortek profilers so the software won't have trouble reading common metadata (the header information) from a prf ... 2011-11-14T13:11:23Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/502529703/949940821/view Hi,  I have tried to use Storm on an HR-ADCP prf file (~600 Mb). Since Storm doesn't show anything that seems to makes sense  (except the properties of ... 2011-11-11T19:42:55Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/751080041/679788784/view Vertical velocity range will work fine for your correction and will be the easiest to determine. 2011-11-08T01:29:45Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/751080041/390070507/view Some of our insitu velocity data exceeded the limit, so I transform the data into Beam(from ENU) velocity and try to correct them. The Correction method is ... 2011-11-08T01:02:39Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/502529703/809649475/view ASCII export from within the Aquapro HR software is simple to load into Matlab. Most of my personal analysis code reads these files. I find reading everything ... 2011-11-01T13:34:11Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/502529703/646860774/view Hi! We are using several HR for bottom current observation, and we're using Matlab for data processing. Now I found that the former version of bin2mat ... 2011-11-01T02:18:58Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/509357018/249202778/view I got it. Thank you very much.   Yuanye Wang 2011-09-27T15:54:58Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/509357018/806374064/view Unfortunately, no. Sidelobes and boundaries cause lots of problems because of the strong echoes associated with them. P.J. 2011-09-26T14:18:07Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/509357018/626821285/view So even for HR Profiler, we cannot obtain the velocity data near bottom due to the effect of side-lobe? 2011-09-26T13:47:48Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/509357018/790951382/view The typical side-lobe interference region is the last 10% of the profile length. For example, for a 1 m profile this would be approximately the last 10 cm. ... 2011-09-25T17:31:44Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/509357018/657629191/view Such as how much of the side-lobe of HR? How many data can we use near the bottom due to the effect of side-lobe of HR?     Best regards, Yuanye ... 2011-09-25T15:02:37Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/509357018/205161789/view hello, I want to know something about the side-lobe of HR profiler. Would you like to tell me. Thanks. Best regards, Yuanye Wang 2011-09-25T15:00:34Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/509357018/205161788/view 2011-09-25T14:06:27Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/871446411/862226529/view Dear Mr. Røstad, Thank you for your quick response. We updated the firmware to the newest available and now it works perfect again. Thank you very much ... 2011-07-15T01:10:13Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/4042362/740521977/view Not that I could notice. Ayal 2011-07-12T23:26:34Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/4042362/740521976/view Hi Ayal,   I was just wondering if you have tried this configuration and weather this have caused any interference in the results?   Thanks, ... 2011-07-12T18:32:29Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/871446411/369286363/view Hi Christian,   Pleas upgrade your firmware and software to the newest available. We saw this sometimes when the midlife main boards were newly ... 2011-07-06T09:19:28Z Comment http://www.nortek-as.com/en/knowledge-center/forum/hr-profilers/871446411/369286362/view Hello,   I am working with a 2MHz Aquadopp HR Profiler and encountered already twice a problem with the data communication between device and computer. ... 2011-07-06T06:12:37Z Comment