http://www.nortek-as.com/en/knowledge-center/forum daily 1 2008-01-21T13:40:40Z http://www.nortek-as.com/en/knowledge-center/forum/velocimeters/506870274/58350501/view Dear Jonas, I did know that the longer time scale sinusoidal fluctuations were waves, it was the small scale ones that concerned me. Could you tell me ... 2010-09-08T13:23:51Z Comment http://www.nortek-as.com/en/knowledge-center/forum/velocimeters/506870274/87697648/view Dear  Arn , The sine shaped fluctuations with a period of 12-13 seconds are waves. The sample to sample variation is short time noise. Regarding the  ... 2010-09-08T07:19:40Z Comment http://www.nortek-as.com/en/knowledge-center/forum/velocimeters/506870274/245564383/view Second attachment : Zoomed in data. 2010-09-07T21:31:06Z Comment http://www.nortek-as.com/en/knowledge-center/forum/velocimeters/506870274/245564382/view Hi,   I am attaching 2 figures of the pressure head time series here. I am a relatively new user of Vector, and I had a couple of questions. The first ... 2010-09-07T21:30:35Z Comment http://www.nortek-as.com/en/knowledge-center/forum/current-profilers-and-current-meters/579860336/244402480/view Hi Christian, I never heard back from Peta, but there are potentially a couple of things going on: 1. bin2mat.dll needs to be rewritten and/or recompiled ... 2010-09-07T20:21:57Z Comment http://www.nortek-as.com/en/knowledge-center/forum/current-profilers-and-current-meters/579860336/198213185/view Hey P.J., I have the same error as above mentioned in Petas comment:     ??? Invalid MEX-file '..\bin2mat.dll': ..\bin2mat.dll is not a valid Win32 ... 2010-09-06T09:30:43Z Comment http://www.nortek-as.com/en/knowledge-center/forum/system-integration-and-telemetry/707588960/815833557/view Hi Jordi,   I just used a space " " and that works fine. SplitStr ( Results_AQD_CP(IndexCell),AQDLine2, " ",3,0) Best regards,   Sicco 2010-09-03T10:29:40Z Comment http://www.nortek-as.com/en/knowledge-center/forum/system-integration-and-telemetry/707588960/257920597/view Hi all,   I've reached to get data srtings using SerialIn ( AQDtLine,SerialPortVCT,100,CHR(10),30) but I can't succeed to split it using SplitStr. ... 2010-09-03T10:16:42Z Comment http://www.nortek-as.com/en/knowledge-center/forum/current-profilers-and-current-meters/162025108/254464962/view Hallo P.J.,   thank you for your quick response, I checked the coordinate system via the header-file. regards, Christian 2010-09-02T11:56:23Z Comment http://www.nortek-as.com/en/knowledge-center/forum/current-profilers-and-current-meters/735463594/221254249/view Hi Andre, Please choose View -> View settings in the main menu. Then choose the Profile tab and check the Downlooking box. Hopefully this will do what ... 2010-09-02T11:47:43Z Comment http://www.nortek-as.com/en/knowledge-center/forum/current-profilers-and-current-meters/735463594/12439611/view When I use storm to see data profiler with measurement head in down direction, Storm shows the data as if the profiler had measured in up direction. I ... 2010-09-02T10:34:13Z Comment http://www.nortek-as.com/en/knowledge-center/forum/system-integration-and-telemetry/796581185/790619521/view Great, thanks! 2010-09-01T16:35:18Z Comment http://www.nortek-as.com/en/knowledge-center/forum/velocimeters/466829984/617576724/view Hello Jesse, You are right electrical noise may currupt the data transmission, especially at high data rates using long cables. Unless the .hdr file reports ... 2010-09-01T09:07:07Z Comment http://www.nortek-as.com/en/knowledge-center/forum/software/451668855/537069893/view Hello, In most cases checksum errors are caused by communication problems during data download or instrument recorder failure. Please upload the .wpr file ... 2010-09-01T08:58:50Z Comment http://www.nortek-as.com/en/knowledge-center/forum/system-integration-and-telemetry/796581185/324021845/view Hi Jim,   I'm happy to tell you that the documentation for this now is available at http://www.nortek-as.com/en/support/application-development  in the ... 2010-09-01T08:18:05Z Comment http://www.nortek-as.com/en/knowledge-center/forum/velocimeters/391898541/447169458/view Hi Mei,   The attached reult seems to be a good one. Good luck with your deployment.   Best regards Jonas 2010-09-01T05:34:17Z Comment http://www.nortek-as.com/en/knowledge-center/forum/system-integration-and-telemetry/796581185/264085887/view The webpage for the new ProLOG describes realtime ASCII output as follows, but does not identify the different fields.     "The ProLog  serial output can ... 2010-08-31T22:56:28Z Comment http://www.nortek-as.com/en/knowledge-center/forum/velocimeters/391898541/972714803/view Hi Johnas, Thanks for the explanation.  The figure I attached yesterday was the one I did slow rotation and gives me the lowest maximum error.  To clarify, ... 2010-08-31T14:40:25Z Comment http://www.nortek-as.com/en/knowledge-center/forum/velocimeters/391898541/972714802/view Hi Johnas, Thanks for the explanation.  The figure I attached yesterday was the one I did slow rotation and gives me the lowest maximum error.  To clarify, ... 2010-08-31T14:40:10Z Comment http://www.nortek-as.com/en/knowledge-center/forum/software/458712175/973154723/view Hi Pascal, The speed of sound is not included in the Surge. If you use the Continental software and do a binary to ASCII conversion you will have it ... 2010-08-31T10:24:53Z Comment